Shiplap Ceiling: A Budget-Friendly Home Upgrade

Adding character to your space doesn’t have to be complicated. Shiplap paneling can transform your ceiling into a charming focal point. Here’s a simplified guide to get you started:

Why Choose Shiplap for Your Ceiling?

Shiplap offers a rustic charm, perfect for enhancing the aesthetic appeal of your home. Its overlapping design creates a visually pleasing pattern, covering imperfections like popcorn ceilings or stains.

Before You Start:

Decide whether to install shiplap directly onto the ceiling or with furring strips, depending on the ceiling’s condition. Ensure any underlying issues like leaks are fixed before installation. Types of Shiplap: Opt for square-edge or nickel-gap shiplap for a seamless finish. Consider tongue-and-groove or v-groove boards for alternative styles.

Safety First:

Turn off power to any electrical fixtures in the ceiling. Gather Your Tools: Electric miter saw Nailer Jigsaw Stud finder Chalk snap line Pry bar Drill Step ladder

Installation Steps:

  1. Clear the ceiling of any obstructions.
  2. Locate and mark the ceiling joists.
  3. Snap chalk lines across the ceiling.
  4. Optional: Install furring strips for uneven ceilings.
  5. Cut and attach the starter board, leaving a small gap.
  6. Nail subsequent boards, ensuring they overlap securely.
  7. Cut around any openings or obstacles.
  8. Measure and cut the final board to fit.
  9. Attach the last board in place.

Pro Tips:

Check board straightness before purchasing. Consider a primed shiplap ceiling for easier painting. Adjust board widths to accommodate variable wall widths—plan for additional trim to cover expansion gaps.

Cost Considerations:

DIY installation can cost $2.50 to $7 per square foot. Ready-made shiplap panels offer a convenient alternative at around $1 per square foot.

Transforming your ceiling with a faux shiplap treatment can add character and elegance to any room without breaking the bank. Here’s how to achieve this high-end look on a budget:

Materials Needed:

Start with 5.5mm 4’x8′ Underlayment plywood, costing around $13 per sheet. You’ll need approximately 5 sheets for an average-sized room.


Have the plywood sheets cut into 6-inch planks at the hardware store. Lightly sand the edges to ensure clean lines between the planks when painted.

Priming and Painting:

Prime the planks with white paint to prep them for installation. Use a finish nailer to attach them to the ceiling. For best results, apply two coats of semi-gloss paint to enhance the wood-like appearance and reflect light, making the room feel brighter and more spacious.

Installation Technique:

Consider starting installation away from the walls to align with other design elements in the room, such as floor grout lines. Use a laser level to ensure precision and consistency in placement.

Finishing Touches:

Complete the look by adding trim around the edges. Paint the trim to match the planks and disguise any irregularities in the walls.

By following these steps, you can achieve a stunning faux shiplap ceiling that adds charm and sophistication to your space, all while staying within your budget. Enjoy the transformation! For more info Click Here

Leave a Comment